• Phone: 800.442.0127
  • Fax: 606.248.5222
Contact Us
Map & Directions
  • Products
  • Featured Items
  • Customer Service

Flex-C-Ment

KEY COMPONENTS TO THE FLEX-C-MENT SYSTEM

Primer 100

  • Designed to permanently adhere Flex-C-Ment overlay systems to concrete, masonry, plaster, drywall, glass, glazed tile and Styrofoam.
  • It also adheres to such adverse surfaces as painted and sealed concrete, as well as linoleum.
  • VOC compliant.  Works for both interior & exterior applications.
  • Has a three warranty on bond when used in conjunction with Flex-C-Ment bagged cement based products.
  • Packaged in 5 gal pails. Covers 700 square feet.

 

 Modifier 300

  • Concentrated EVA (ethyl-vinyl-acetate) polymer admixture that mixes with Flex-C-Ment Stamp Overlay and SprayFlex mixes to promote physical properties of the cured products.
  • Improves all physical properties of the cured product including:  compressive, tensile and flexural strength, workability, freeze-thaw resistance, and flexibility.  Resists the ravaging effects of de-icing salts.
  • Packaged as a concentrate in 5 gal pails.  Mixes with 10 gallons of water to make 15 gallons of usable modifier.  Mixes 12 bags of Stamp Overlay or SprayFlex.
  • High-strength, lightweight, polymer enhanced, dry cement  mix designed to produce continuous, manufactured cement stone systems on vertical surfaces.
  • Mixes with water to produce a user-friendly mortar that can be applied up to 2” thick if needed.  Typically applied ½” to 1” thick to be stamped or textured,

 Wall Mix

Hand-carved and colored to produce the look of natural hand laid stones.

  • Applied to approx. 100 % contact to eliminate the voids behind the stones that can typically cause water intrusion, insect intrusion as well as deteriorated mortar joints that can occur within other types of stone applications
    • Available in gray or white cement.
    • Packaged in 50 lb bags.  Covers 8 square feet at ¾”.
  • A blend of cement, fine aggregates and fibers to mixed with Modifier 300 to create a dense, high strength, long-lasting stampable overlay system.
  • The special blend of silica aggregates and the user friendly nature of our EVA Modifier 300 make this a very workable and easy to apply stamp overlay system.
  • Available in gray or white cement.  The white is recommended for better water resistance and all submerged applications such as water features and showers.
  • High psi compressive strength makes it ideal for all exterior applications of high wear, including sidewalks, porches, driveways and parking areas.
  • Packaged in 60 lb bags.  Covers 18 square feet at 3/8”.

 Spray Flex

  • A high-strength blend of cement, fine aggregates and fibers used for spray applications to pool decks and vertical stucco applications as well as can be used as a stamp able overlay system. See Overlay for details.
  • Mixes with Modifier 300 or Modifier 500 for when used as spray texture and Modifier 300 when used as a stamp able overlay system
  • Available in gray or white cement.
  • Packaged in 60 lb bags.  Covers 120 square feet in one application for spray texture and covers approx. 18 sq ft at 3/8” stamp able overlay system.

  • Resources

  • About Us
  • Featured Project
  • Credit Application
  • Catalog and Product Brochures
  • Free Estimates
  • Term and Conditions
  • Become a Retailer
  • Help and Advice

Never has a retaining wall been so easy to install and look so realistic. Bell Concrete has the best products around.

Steve Smith,

Middlesboro, Kentucky

Bell Concrete Industries

Do not hesitate to contact us if you have any questions or product requests:

General Inquires About Us Help & Advice

  • Contact Us

  • Phone: 800.442.0127
  • Fax: 606.248.5222
  • Address

  • 327 North 19th Street
  • P.O. Box 1561
  • Middlesboro, KY 40965
  • Social

  • inquiry@bellconcreteindustries.com

Search

More Information

Order a Catalog or Brochure