Pakmix Mortar Accelerator
1-Gallon jugs (4/case)
Pakmix Mortar Accelerator is a multi-component admixture formulated specifically to:
Accelerate the normal setting rate of mortar
Increase early and ultimate compressive strength development
Mortar accelerator is especially beneficial during cold weather masonry applications.
Pakmix mortar accelerator is not an anti-freeze and does not prevent mortar from freezing.
Mortar accelerator is compatible with regular, and colored cements.
Once contractors begin using Pakmix mortar accelerator on a project, they should continue to incorporate it throughout the entire project, to prevent the occurrence of any slight color differences between plain and treated mortar/cement.
Directions for use:
At the recommended dosage from the chart below, Pakmix mortar accelerator should be added to the gauging or water mix. Do not let the admixture come in direct contact with the dry cement.
(ounces per bag of cement)
32F / 32oz
25F / 48oz
20F / 64oz
32F / 16oz
25F / 16oz
32F / 160z
25F / 16oz
20F / 32oz
Techniseal Polymeric Jointing Sand is a high-tech mix of graded sand (ASTM C-144) and binder, specially formulated for the filling of narrow or wide joints when installing pavers, slabs or natural stones, or when replacing existing joints. Unlike conventional sand, it stays in place and remains stable. It softens when wet and firms up when dry to better resist soil movements.
Non-Skid Grit is a colorless, synthetic polymer aggregate designed for use in Cure & Seal as an anti-slip agent. Non-Skid Grit is the ultimate aggregate for Cure & Seal as it stays well dispersed and dries to match the base color.
Applications:Non-Skid Grit can be used for:
* Exterior Pavements
* Warehouse Floors
* Pool Decks
* Textured Surfaces
* Parking Garages
* Super-strong polymer for excellent chemical and wear resistance
* Low specific gravity for better dispersability
* Colorless to match the base coating
* Non-reactive, better durability than conventional silicate aggregates
* UV stable, will not yellow or discolor
A proprietary polymerized solids in a water- based V.O.C. compliant system, ready-to-use liquid that reacts with the free lime in concrete to form an insoluble crystal within the concrete pores to help repel water, De-icing salts and to seal, harden and dust proof concrete surfaces.
Available in 1-Gal containers.
SB-4000 Water Repelling Invisible Sealer
Description: SB-4000 Water Repelling Invisible Sealer is a water based, penetrating, low VOC sealer that provides an invisible, durable barrier against liquid absorption on retaining walls, concrete and pavers. The finish has a natural look that does not affect the appearance of the substrate.