Pakmix was founded in 1980 by a group of owner operated packagers who were producing primarily cement based products under their own individual brand. The mission behind forming of this new company was to enable single location companies to band together as one to purchase, manufacture, and sell under a common brand name but yet remain independently operated.
Bell Concrete Industries is proud to be one of the founding companies of this unique approach that is still going strong today. It is the uniqueness of the Pakmix structure that gives our dealers and customers a national brand name that has the attention to quality of product and service found only in owner operated businesses.
Learn more about Pakmix and what they have to offer at www.pakmix.com.
Is a specially formulated blend of Portland cement, sand and gravel ideal for use where a thickness of two inches or greater is required. All ingredients are thoroughly premixed to ensure maximum strength and workability. Simply add water. Available in 40, 60, and 80lb bags.
Is a specially formulated blend of Portland cement, lime or fire clay and fine sand. This product is ideal for use in the laying of bricks, block or stone. All ingredients are thoroughly pre-mixed to ensure maximum strength and workability. Simply add water. Meets or exceeds strength requirements of ASTM C-387 for Type N mortar when used as directed. Available in 60 and 80lb bags.
Ideal for use where a thickness of one inch to two inches is required. All ingredients are thoroughly pre-mixed to ensure maximum strength and workability. Available in 60 and 80lb bags.
Is a scientifically formulated blend of cement and other ingredients that expands as it sets. Use in either a trowel or pourable consistency indoors or outdoors. Simply add water.
Premium All Purpose Sand
Is a clean, graded sand with multiple uses. Mix with Portland Cement and gravel to make concrete. Underlayment for brick pavers, gardens, and more. PAKMIX® All-Purpose Sand exceeds ASTM C-33.
Pakmix® Commercial Grade Sand is a clean, graded sand with multiple uses which is available in fine, medium, and coarse grades.
DO NOT USE FOR SANDBLASTING
Available in: 50 lb., 100 lb. Bags, and 1500 lb. Super-Sacks
Black Top Patch
Is a ready-to-use mixture of asphalt and graded aggregates ideal for the repair of blacktop surfaces. Pre-blended no mixing is required before use.
Is a liquid bonding adhesive for improving the bond between new Portland cement mixes and existing surfaces. Easily applied by brush, roller or spray.
Fast Setting Concrete
Is a specially formulated blend of Portland cement, aggregates and admixtures. PAKMIX® Fast Setting Concrete Mix is ideal for use where a fast setting time and/or high strength is desired. Simply add water.
Is a scientific blend of non-ferrous admixtures, graded sand and Portland cement. This product is a high strength, general purpose grout for most construction applications at any consistency-drypack, plastic or flowable.
Portland Cement Type I & II
Provides the basic performance characteristics of Type I portland cement, as well as the moderate sulfate resistance and lower heat of hydration
characteristic of Type II portland cement. Available in 47 and 94lb bags.
Is washed, sterilized, dried, screened, and contains no organic matter. Can be used with cement mixes.
Quick Set Cement
Is a scientifically formulated blend of cement, silica sand and other ingredients for fast setting repair of concrete and masonry surfaces. Ready for use in four hours.
Stop Leak (Hydraulic) Cement
Is a specially formulated blend of cement and other ingredients designed to stop the flow of water through cracks and holes in concrete and masonry.
Super 5000 Concrete Mix
Is a specially formulated blend of Portland cement, sand and gravel ideal for use where a thickness of 2″ or greater is required. It is a high strength 5000 psi contractor grade formula. All ingredients are thoroughly premixed to ensure maximum strength and workability. Simply add water and mix. Exceeds strength requirements of ASTM C-387 when used as directed.
Surface Bonding Cement
Is a blend of cementitious material, fiberglass fibers and proprietary ingredients.
Type S Masonry Mortar
Is a contractor grade mortar mix designed to lay brick, set block, patching, tuck point and stone work. This product exceeds ASTM C270.
Is a scientifically formulated blend of Portland cement, graded sand, vinyl polymer and other ingredients for patching and resurfacing concrete and masonry. Can be troweled on horizontal or vertical surfaces. Simply add water.
A fiber reinforced surface bonding mortar. A dense impact resistant sealant with
high compressive and flexural strengths.
For sealing ribs, walls, and roof structures.
Medium and fine Commercial grade sand.
50lb bags, 56 bags per pallet.
Pallet weight 2800 lb.
Pakmix Masonry Sand is suitable for field-preparation of mortar. A washed properly graded masonry sand.
Available in: 50 lb. and 1500 lb. Super-Sacks